Saturday, May 11, 2013

21 Traits of an Awakening Soul



May 10, 2013 | By  | 12 Replies
Flickr - NASA - NASA Goddard Photo and VideoChristina Sarich, Contributor
Waking Times
You can say its because of a global shift in consciousness, a destiny we have arrived at due to spiritual evolution, or the outcome of strange times, but, many people all across the globe are going through intense personal changes and sensing an expansion of consciousness. Personal changes of this magnitude can be difficult to recognize and to understand, but here are 21 traits of an awakening soul, a ‘sensitive’, or an ‘empath.’
1.  Being in public places is sometimes overwhelming. Since our walls between self and other are dissolving, we haven’t really learned to distinguish between someone else’s energy and our own. If the general mood of the crowd is herd-like or negative, we can feel this acutely, and may feel like retreating into our own private space. When we have recharged our batteries with meditation, spending time in nature, far away from other people, or just sitting in quiet contemplation, we are ready to be with the masses again. In personal relationships, we often will feel someone else’s emotions as our own. It is important to have this higher sense of empathy, but we must learn to allow another person’s emotions while observing them and keeping our empathy, but, realizing that not all emotions belong to us. Social influence can dampen our own innate wisdom.
2.  We know things without having to intellectually figure them out. Often called intuitive awareness, we have ‘a-ha’ moments and insights that can explain some of the most complex theories or phenomenon in the world. Some of the most brilliant minds of our time just ‘know.’ Adepts and sages often were given downloads of information from higher states of consciousness after meditating or being in the presence of a more conscious individual; this is happening for more people with more frequency. As we trust our intuition more often, it grows stronger.  This is a time of ‘thinking’ with our hearts more than our heads. Our guts will no longer be ignored. Our dreams are becoming precognitive and eventually our conscious thoughts will be as well.
3.  Watching television or most of main stream media, including newspapers and many Hollywood movies is very distasteful to us. The mindset that creates much, but not all, of the programming on television and in cinema is abhorrent. It commodifies people and promotes violence. It reduces our intelligence and numbs our natural empathetic response to someone in pain.
4.  Lying to us is nearly impossible. We may not know exactly what truth you are withholding, but we can also tell (with our developing intuition and ESP skills) that something isn’t right. We also know when you have other emotions, pain, love, etc. that you aren’t expressing. You’re an open book to us. We aren’t trained in counter-intelligence, we are just observant and knowing. While we may pick up on physical cues, we can look into your eyes and know what you are feeling.
5.  We may pick up symptoms of your cold, just like men who get morning sickness when their wives are pregnant. Sympathy pains, whether emotional or physical, are something we experience often. We tend to absorb emotion through the solar plexus, considered the place we ‘stomach emotion’ so as we learn to strengthen this chakra center, we may sometimes develop digestive issues. Grounding to the earth can help to re-establish our emotional center. Walking barefoot is a great way to re-ground.
6.  We tend to root for the underdog, those without voices, those who have been beaten down by the matrix, etc. We are very compassionate people, and these marginalized individuals often need more love. People can sense our loving hearts, so complete strangers will often tell us their life stories or approach us with their problems. While we don’t want to be a dumping ground for everyone’s issues, we are also a good ear for those working through their stuff.
7.  If we don’t learn how to set proper boundaries, we can get tired easily from taking on other people’s emotions. Energy Vampires are drawn to us like flies to paper, so we need to be extra vigilant in protecting ourselves at times.
8.  Unfortunately, sensitives or empaths often turn to drug abuse or alcohol to block some of their emotions and to ‘protect’ themselves from feeling the pain of others.
9.  We are all becoming healers. We naturally gravitate toward healing fields, acupuncture, reiki, Qi-Gong, yoga, massage, midwivery, etc. are fields we often find ourselves in. We know that the collective needs to be healed, and so we try our best to offer healing in whatever form we are most drawn to. We also turn away from the ‘traditional’ forms of healing ourselves. Preferring natural foods, herbs, and holistic medicine as ways to cure every ailment.
10.  We see the possibilities before others do. Just like when the church told Copernicus he was wrong, and he stood by his heliocentric theory, we know what the masses refuse to believe. Our minds are light-years ahead.
11.  We are creative. We sing, dance, paint, invent, or write. We have amazing imaginations.
12.  We require more solitude than the average person.
13.  We might get bored easily, but we are really good at entertaining ourselves.
14.  We have a difficult time doing things we don’t want to do or don’t really enjoy. We really do believe life was meant to be an expression of joy. Why waste it doing something you hate? We aren’t lazy, we are discerning.
15.  We are obsessed with bringing the truth to light. Like little children who say, “that’s not fair” we want to right the wrongs of the world, and we believe it often just takes education. We endeavor to explain the unexplainable and find answers to the deep questions of life. We are seekers, in the Campbellian paradigm. ‘The Hero With a Thousand Faces.”
16.  We can’t keep track of time. Our imaginations often get away with us and a day can feel like a minute, a week, a day.
17.  We abhor routine.
18.  We often disagree with authority (for obvious reasons).
19.  We will often be kind, but if you are egotistical or rude, we won’t spend much time with you or find an excuse to not hang out with people who are obsessed with themselves. We don’t ‘get’ people who are insensitive to other people’s feelings or points of view.
20.  We may be vegan or vegetarian because we can sense a certain energy of the food we eat, like if an animal was slaughtered inhumanely. We don’t want to consume negative energy.
21.  We wear our own emotions on our sleeves and have a hard time ‘pretending’ to be happy if we aren’t. We avoid confrontation, But will quietly go about changing the world in ways you can’t even see.
These 21 traits of an awakening soul are a reminder of how important it is to maintain awareness, clarity and strength in these interesting times. If you are experiencing something that is not on this list, please add it to the comments section below.
About the Author
Christina Sarich is a musician, yogi, humanitarian and freelance writer who channels many hours of studying Lao Tzu, Paramahansa Yogananda, Rob Brezny, Miles Davis, and Tom Robbins into interesting tidbits to help you Wake up Your Sleepy Little Head, and See the Big Picture. Her blog is Yoga for the New World. Her latest book is Pharma Sutra: Healing the Body And Mind Through the Art of Yoga.
This article is offered under Creative Commons license. It’s okay to republish it anywhere as long as attribution bio is included and all links remain intact.

3D AR-15 Parts


Thingiverse Cracks Down on Firearm Parts

By  , 2012/12/20 @ 6:40 pm
3D-printed AR-15 lower receiver
This is the lower receiver of an AR-15 rifle, printed in fused plastic filament from a digital model that was, until this week, freely available for download on Thingiverse.
This part is significant because all other parts of the common rifle can be readily purchased in the open market.  A person who builds a working lower receiver has, in the eyes of the state, essentially built a working AR-15. It is legal to do so for personal use (at least under US law), but until lately the required tools, time, and talent put the project beyond the reach of most casual tinkerers.
The rise of desktop manufacturing, however, may be set to change all that. Recently, a 3D printed AR-15 lower receiver made of fused plastic filament was demonstrated to fire and cycle six times before breaking.
Andy Greenberg over at Forbes has the story on the removal of this model, and other key firearms-related physibles, from Thingiverse.  As of this writing, no official statement appears on either MakerBot’s or Thingiverse’s sites, though the action seems entirely consistent with Thingiverse’s established Terms of Use, which were updated following the the site’s first firearms controversy back in 2011 to include proscriptions against content that “contributes to the creation of weapons.”
Up to now, however, the policy has gone largely unenforced.

10 ways 3D printing is changing the medical world




3D printing has changed the world in quite a few aspects, but I think we all should pay more attention to its advances within the medical world. Some of the things that this technology can do will blow your mind, and it could potentially save your life, too.

Custom Jaw Implants

Patient-specific cases require entirely unique parts and apparatuses to be manufactured, and 3D printing is pretty reliable when it comes down to creating accurate pieces. One case in particular sticks out in my mind. Within the last couple years, an 83-year-old Belgian woman was dealing with a serious infection in her lower jaw. Doctors concluded that it needed to be removed. She needed a transplant.
3D printed jaw
For this woman to be able to chew, talk, and breathe – a new jaw was required. Thanks to direct metal laser sintering (DMLS) by Materialise, doctors were able to manufacture a titanium implant weighing in at just 107 grams. The final piece was treated, polished, and coated with “artificial bone” and then implanted.

 The “WREX” Exoskeleton

Quite a few medical situations require entirely unique parts, systems, and surgeries. A uniform “small” or “medium” sized apparatus won’t cut it when it comes to certain individuals. Emma Lavelle is a perfect example of this. Emma suffers from arthrogryposis multiplex congenital (AMC), a condition which causes stiff joints and very underdeveloped muscles. At an AMC conference, Emma’s mother learned about the WREX, an apparatus which empowers children with AMC to move their limbs. Unfortunately, the WREX is typically manufactured through CNC cutting, which simply couldn’t make parts which were small enough, detailed enough, and light enough for Emma to use. This is where 3D printing comes into play.
3D printed exoskeleton
Through a Stratasys 3D printer and ABS plastic, Emma was given an entirely unique apparatus which helps her to move her arms. Emma needed everything custom – and 3D printing was there to show for it.
More info here.

Custom Prosthetic Limbs

Losing a limb has to be a frustrating experience and I have quite a bit of respect for people that have to deal with those medical predicaments. Fortunately, doctors and engineers are always working to make these situations better, and they have definitely helped out the world of prosthetic limbs through 3D printing.
3d printed prosthetic leg
Through 3D printing, doctors and engineers have introduced entirely unique (and stylish) prosthetic limbs. If you’ve ever been limited to a cane, wheelchair, or a pair of crutches for a long period of time, your “device” becomes a part of you, in a way. Why not make it stylish? Some patients have friends and family write on casts. Some put stickers on their wheelchairs. Many carve into canes & paint parts of crutches. 3D printing helped the above patient to do one better.
More info here.

Organ Replication

Anthony Atala and his team at Wake Forest Institute for Regenerative Medicine have been doing something pretty incredible. They have been working on organ replication! Atala has helped to produce functional bladders, blood vessels, skin, and other body parts. There have been several implanted bladders so far, and his team is working hard to keep pressing the envelope for organ replication, all through 3D printing.
3D printed organ
Although this technology is still in the research and testing phase, it shows quite a bit of promise. This could be hypothetical, but what if we didn’t have to worry about organ failure? Perhaps visionaries like Anthony Atala will use 3D printing to bring us there.
More info here.

Facial Reconstruction

In Belgium, a patient was suffering with a defect leaving him with just soft tissue and bone on his face. To fight his medical predicament, a full face transplant was necessary. 3D printing was one of the key factors with the world’s 19th face transplant.
3D printed face transplant
3D printing is great on the individual level for making entirely unique and custom pieces – here is a prime example. For this facial transplant, patient-specific cutting guides and models were 3D printed at Materialise in Belgium. Through 3D printing, this procedure was much easier for engineers and doctors to plan and operate. Pretty cool, huh?
More info here.

Treatment of Burn Victims

There are multiple types of “bio-printing” in existence today. In most of these situations, doctors will harvest cells from your body. Once harvested, these cells will be incubated, cultured, and then implanted back onto / into patients. Anthony Atala and his team are famous for starting the organ replication movement. Fortunately, there is more than just organ replication coming into play. Researchers are starting to implement skin fabrication.
burn victims 3D printing
Sometimes patients deal with very atypical injuries, requiring specialized health care. A prime example of an atypical injury would be a burn wound. These accidents and incidents leave victims scarred for life, occasionally with irreparable damage. Through skin fabrication, doctors and engineers are working to improve the lives of burn victims around the world – all through 3D printing.

Treatment of Head Injuries

3D printing has definitely left it’s footprint in the medical world so far, and will continue to do so. In fact, it has been doing so for the past couple years. To help patients on an individual basis, various implants have been manufactured through 3D printing.
3D printed titanium skull implant
There are already quite a few applications for implants. The image above features a 3D printed titanium plate, created by EOS using a DMLS process. Protecting the head is a pretty big deal, and I’m sure this patient is grateful for the procedure.

Hearing Aids

I’m not super knowledgeable about hearing aids, but I know that 3D printing has played a large role in fabricating them. What happens when a seriously intricate and entirely custom piece is needed for an individual patient? Typically, machining would come into play – but hearing aids are usually too small, too intricate, and use very unique materials.
3D printed hearing aids
Did you know that 10,000,000 people are currently wearing 3D printed hearing aids? When a team of engineers or doctors need an entirely unique, intricate, and specialized piece – 3D printing can usually rise to the occasion.

Custom Medical Diagrams and Visuals

Aside from the various functional parts manufactured, there are several other 3D printing applications that appeal to the medical world. Planning is a huge deal when going into surgery; patient analysis is very crucial. 3D printing has the power to help by fabricating high quality diagrams and visuals.
3D printed skeleton
Traditional forms of planning have worked, but 3D printing offers an upgrade. Sketches and diagrams have worked in the past, but 3D modeling is becoming much larger now-a-days. Thanks to the availability of 3D printing, these computer models can be used to fabricate physical diagrams.

Various Other Implants

There are several other procedures that have already taken place that involve 3D printed implants. When it comes down to it, 3D printing is good for creating specialized pieces that other forms of manufacturing can’t touch.
3D printed custom implants
Various implants have been manufactured and used through 3D printing, such as hip implants, leg implants, knee-cap implants, and the one above – spinal implants. I’m sure there will be other patient-specific cases in which very unconventional prints will come about, but as of right now the sky is the limit.

The Final Word

Without a doubt, our generation is beginning to witness technology as it impacts the medical world. Teams of manufacturing engineers, doctors, and biomedical engineers are using various technologies to change the way in which we receive health care. One of the primary technologies used in this medical movement is 3D printing, and I strongly recommend that you follow it. Perhaps this technology will save your life someday.